 |
Gresen TB12 pump has an output of 12 GPM at
1500 psi, a 1" NPT flange inlet port, and a 3/4" NPT outlet
port. Shaft is 3/4" with a 3/16" keyway. Rotation is clockwise.
Counter clockwise rotation is available by special order. |
Order Description:
TB-12 Hydraulic Pump |
| |
Gresen TC16 pump has an output of 19 GPM at
1500 psi, a 1 1/4" NPT flange inlet port, and a 1" NPT flange
outlet port. Shaft is 1" with 1/4" keyway. Rotation is
clockwise. Counter clockwise rotation is available by special
order. |
Order Description:
TC-16 Hydraulic Pump |
 |
Pitts electric for TB and TC series hydraulic
pumps. Stocked in 12 VDC but also available in 24 VDC models. |
Order Description:
Pitts Electric Clutch
(Please specify pump model when ordering) |
 |
Constructed from cast aluminum. Available for
the TB and TC series pumps. |
Order Description:
Hydraulic Pump Foot Mount
(Please specify pump model when ordering) |
 |
White Roller Stator (RS Series) motors are the
most economical model in the White Drive product line.
RS Series motors utilize the patented Roller Stator design.
Seven precision rollers for the contact points reduce friction,
providing more power and longer life. Each output shaft is
custom ground to maintain exact tolerances between the housing
and shaft, producing high volumetric efficiencies. Industry
standard mounting flanges and output shafts allow the RS series
motors to interchange with competitive designs. For more
information on these motors, please contact the SNL sales staff. |
Order
Description:
Please call SNL for assistance. |
 |
RE Series motors offer the perfect compromise
between price and performance by producing power at a reasonable
cost. Although these motors perform well in a wide range of
applications, they are especially suited for low flow, high
pressure applications. These motors are typically used on
longline reels. For more information on the motors, please
contact the SNL sales staff. |
Order
Description:
Please call SNL for assistance. |
 |
Brand AO755T4LRS
FEATURES: Small and compact design. Positive metering
in either direction with the
manually shifting handle. Precision ground chrome plated spool that
assures long life. Rated for 0-18 gpm (0-68.1 lpm). Rated for 3000 psi
(207 bar). Weighs 5-1/2 lbs. (2.5 kg). Std. Port sizes.
3/4"NPT Inlet/outlet and 1/2"
NPT work ports. Tandem center, 4 way, spring center. Adjustable relief.
Lever handle (B port is
active when handle pushed).
30 - Micron filtration recommended.
|
Order Description:
Brand AO755T4LRS Control Valve |
 |
Rotary 'In and Out' spool allows throttling response to longline
equipment. Built in pressure relief set at 1800psi. Equipped with
stainless steel spool ideal for the marine environment. Handle is not
included. |
Order Description:
SPW4 Control Valve |
 |
Constructed from marine grade aluminum. |
Order Description:
Hydraulic Reservoir Tank
(Please specify size when ordering)
Available in a 12 gallon (10 1/2"W x 16"L x 16"H) and an 18
gallon (10 1/2"W x 16"L x 24"H) model. |
 |
Series DWV relief valves are differential area,
crossover relief (cushion valves). They are designed to
eliminate or minimize shock, surge, or overload conditions on
hydraulic equipment. On longline gear this valve minimizes the
shock on the pump and motor caused by the momentum of the spool
when the control valve is shut. |
Order Description:
DWV-50 Cushion Valve |
 |
Brand B50, non-adjustable, proportional flow divider. The B series
receives a single stream of fluid and divides it into two output
streams. The ratio of division to the two outlets will remain constant
even though the work being done by one of the streams is much greater
than the work being done by the other. The ratio of the outlet flows,
remains constant even when the input flow increases or decreases.SNL
Corporation stocks the 50:50 output ratio. |
Order Description:
50:50 Flow Divider |
 |
Brand FC-51 Flow
Control Valve :The Brand, full range pressure compensating
variable flow control is designed so that the orifice area varies as the
lever is rotated. Fluid travels past the variable orifice, through the
compensator spool and then out the controlled flow port. Therefore the
flow out of the CF port is proportional to the orifice area which can
vary from closed to open. The sum of the controlled flow and the excess
flow equals the inlet flow and as the controlled flow increases the
excess flow decreases. Both outlet flows are pressure compensated with a
spool that maintains a constant flow by adjusting for pressure. Hunting
between the compensated pump and our valve is dampened with a dashpot on
the compensator spool. Thus, the outlet flow is smooth and constant
regardless of the pressure on the CF and EX port. External seals on the
rotary spool prevent contamination from getting between the spool and
the casting, thus preventing the spool from locking in one position. All
FC’s are built with stainless steel (416) rotary spools to help prevent
the rotary spools from locking up when they are in a corrosive
environment. |
Order Description:
Variable Flow Control Valve |
 |
Large Gresen hydraulic filter with 3/4" NPT
ports. Designed to be mounted on the return side of the
hydraulic system. Spin on 10 micron filter. |
Order Description:
FSP212-1EDNX Filter Unit |
 |
S-50 Selector Valve
Two-position, three way selector valve. Designed for directing flow from
one single pump to one, or the other of two separate hydraulic
lines. The valve should be shifted prior to the application of pressure.
The flow forces might make this valve difficult to shift under normal
operating pressure and flow conditions.
Operation: Flow enters the valve at the inlet port, when the lever is
pushed in, the spool shifts allowing inlet flow to reach the work port
furthest away from the lever. When the lever is pulled out, the spool
shifts allowing inlet flow to reach the work port closest to the lever.
|
Order Description:
S50 Selector Valve |
 |
HM-50 Float Valve
Two-position, three way selector valve. Designed to be used with a
three-position, four way valve to provide a float or free-wheeling
condition. The valve should be shifted prior to the application of
pressure. The flow forces might make this valve difficult to shift under
normal operating pressure and flow conditions.
Operation: Flow enters the valve a the inlet port., when the lever is
pushed in, the spool shifts allowing inlet flow to reach the work port
furthest away from the lever. When the lever is pulled out, the spool
shifts allowing inlet flow to reach the work port closest to the lever.
|
Order Description:
HM50 Float Valve |
 |
The Brand, adjustable relief valve is precision
built, dependable and low priced. The RL relief valve are of the
ball spring type, which is the most dependable type of relief
valve. The ball will not jam, lock, or seize and will always
open. All ports are 1/2" NPT and the relief is set at 1500psi. |
Order Description:
1500 psi Pressure Relief Valve
|
 |
3/4" Brass ball by-pass valve. 1800psi maximum
pressure. Used to eliminate pump pressure from pressure side of
hydraulic motor, so longline spool can free spool. |
Order Description:
3/4" Ball By-Pass Valve
|